Saturday, March 12, 2011

Freehanding made simple and effective.

Freehand can make or break a doll – If it looks nice then it’ll really take the mini to the next level, whereas poor freehand will make the mini look like it has been ambushed by orkish graffiti painters.

Here is my ‘secret’ receipt for making freehand simple, and effective:
Look at the image you’re about to paint freestyle – Find the centre-line and search for the geometrical figures that it is made up of.

In my example I’m going to paint an airborne badge on the shoulder pad of a storm trooper.


The airborne badge is made up of several geometrical shapes. The parachute is a triangle with a centre line and half a circle. Painting the centreline of the triangle would be a good way to start to position the badge on the shoulder pad. So I start with the triangle to position the image.


Then I paint the half circle, and fill it.



Then I paint the sides and top of the wings, that’ll help me position the feathers nicely and ensure that they are parallel with the top and that the length is correct.


Finally all remaining feathers are painted, and the freehand is now done.


This technique can also be used for writing – In my example I want 102 on the other shoulder pad. So I start by painting the 0 in the centre of the shoulder pad, and then use that to guide the two other numbers.

Another trick is to use a pencil to draw some guide lines and the paint on top of that if the image is more complex than the one shown here.

/Nicolai aka Atoom

Friday, March 11, 2011

Leman Russ – The Punisher

I bought the new demolisher/punisher/executioner kit when it was released, and I must say that I’m very pleased with the kit. Not only does it have 3 different main weapons, but it has all the weapon variants for hull and sponson mounting are they’re interchangeable. At first is started looking at magnetizing the main gun, but it turned our that it wasn’t necessary as it can sit there on its own if you glue the gun mount in a slight upwards angle.

Now I’m done with the painting, and the Punisher is ready for action. I’ve played it a couple of times with my Catachans, and I just love the sad look on the opponent’s face as the punisher gatling cannon forces a wagon-load of saves.

Here it is in all it’s glory – Weathering and stencils used for marking have been described earlier on my blog, if you’re interested in how it was painted.


/Nicolai aka Atoom

Thursday, March 10, 2011

Homemade airbrush stencils that fit any purpose.

Making a stencil that fits exactly you purpose made easy – In matter of minutes you’ll have yourself any image transferred into a stencil for painting your dolls!

Tools needed are:
  • Computer and printer.
  • Laminator & a laminating pockets.
  • Hobby knife & Scissors.
  • Airbrush, compressor and paint.
Making the stencil:
  1. Use Google picture search to find the image you want to use as stencil. Simple images like skulls and the imperial eagle are nice, simple and easy to use.
  2. Measure the area where the image is to fit, as you’ll use these measurements to scale the image.
  3. Use Powerpoint or Word to scale the picture (right click the picture and select 'Format Auto shape' after pasting it into a new document - then the size can be set using the size tab). Check my tutorial on banners for detailed info.
  4. Print the image and laminate it.
  5. Use combination of hobby knife and scissors to cut the stencil from the laminated piece of paper.

Applying & using the stencil:
  1. Use masking tape to fix it to the target.
  2. Use airbrush to apply paint.
  3. Remove stencil and enjoy the result.


Example:
I have used a brush to paint the eyes in the skull. But this could have been done using a stencil also…


/Nicolai aka Atoom


Wednesday, March 9, 2011

Weathering tanks – Quick and dirty!

As mentioned in an earlier post tanks needs to get some weathering in order to look like they have seen action… I’ll show how I do mud and chipping of paint, quickly and with a nice finish.

The tools needed are:
  • A large drybrush, or any brush with stiff brushes for stibbling mud onto tracks and surrounding areas.
  • Some foam from a blister for making the chipped paint, tear off a piece, don’t cut it, as you need the rugged edge for application of paint.
  • Brown paints for the mud, at least two a dark and a light brown
  • Black and metal paints for the chipped paint effects.
Mud:
  1. Bring out your drybrush (you could use a stibbling brush, but I prefer a brush with long hair).
  2. Dip it in the darkest brown.
  3. Wipe some paint off on some paper.
  4. Stipple areas around the tracks and the tracks.
Repeat for each time you change to a lighter tone of brown. Stipple less and less for each time to leave the darker brown to show.


Chipped paint:
  1. Take the foam and dip the ragged edge in the black paint.
  2. Wipe some paint off on some paper (I tend to do that on my wet-palette, as it thins the paint).
  3. Press the foam gently against areas where a tank is likely to hit something that will remove paint, or areas where battle damage has occurred.
  4. Bring out a small brush.
  5. Paint the centre areas of the blacks with metal.


Combining the two I got his result in 20 minutes or so:


/Nicolai aka Atoom

Tuesday, March 8, 2011

Taking the Speed Freaks for a spin...

Yesterday I had a couple of games with my orks. I tried out an alternative build, focussing on speed.

The list I played was 1600 point:
1 Battlewagon = (Deff Rolla, Red Paint Job, Kannon,  Big Shoota x3) carrying
Warboss ('Eavy Armour, Attack Squig, Bosspole, Cybork Body, Power Klaw, Shoota/Skorcha Kombi-weapon)
18 Choppa Boyz, and 1 Boyz Nob, ('Eavy Armour, Bosspole, Power Klaw)

1 Battlewagon = (Deff Rolla, Red Paint Job, Kannon,  Big Shoota x3) carrying
6 Nobz ('Eavy Armour, Waaagh! Banner, Power Klaw, Big Choppas and one combi scorcha)

1 Trukk (Boarding Plank, Red Paint Job) carrying
10 'Ard Boyz and 1 'Ard Boyz Nob (Bosspole, Power Klaw)

1 Looted Wagon (Armour Plates, Red Paint Job, Reinforced Ram) carrying
1 Big Mek (Eavy Armour, Bosspole, Cybork Body, Kustom Force Field, Burna)
8 Burna Boyz

5 Warbikers and 1 Biker Nob (Bosspole, Power Klaw)

3 Warbuggies (Twin Linked Rokkit Launcha)

The strategy:
The games were very quick, both in length and speed in movement. The two deff-rolling battlewagons safeguarded by the kustom force field carried by the big mek, was an insane combo. It wrecked havoc and allowed be to set the agenda for when and who to fight. Basically all passengers stayed in their vehicles until enemy transporters were disabled then charged out.

The warbikers and buggies served the purpose of stinging the enemy ordnance guns and other heavy weapons that posed a threat against the transporters. The strength of this list was it’s ability to set the agenda for fighting and the two deff rollers that steamrolled both dreadnaughts and defilers alike.



/Nicolai aka Atoom

Black-lining – Quick and easy!

Just a quick tutorial on how to cut corners on black-lining – Something I personally hate, until now that is. I’m pretty sure that this is no news to many, but I’ll post it anyways, as I estimate that I save more than an hour using this technique for every tank I paint.

The tool is simply a pen! A black pen 0.1mm water based, water resistant, pigment ink pen! The pen is used to simply draw the black lines onto the tank instead of using a brush. It is easy to handle, making it fast and reducing the mistakes to a minimum.

Here are some pictures:

Before:
After:

Now all it needs is some weathering and freehand – Something that I’ll get back to another time…


Not only is the pen good for black-lining tanks, it also works on power-armour and other minis where the recesses are clearly defined. Another use for the pen is shading freehand and drawing text, as it is much more steady than a brush (at least in my hands that is).

/Nicolai aka Atoom

Sunday, March 6, 2011

Running low on plasma? - Model your own!

When I was doing a plasma heavy vet squad for my IG I came across a problem – The lack of special weapons in the kits, in this case plasma, for my guardsmen. Fortunately there is a very simple way of getting a lot of plasma guns for the troopers. I play Catachan IG, and that leaves me with a lot of flamers. Another thing have a lot of in my bits box is plasma pistols, as the Space Marine assault squads have lots of these included.

Flames and plasma pistols combined with Green-stuff gives plasma guns.

Here is what I do:
  1. Cut flamer barrels and propane tanks from the flamer.
  2. Cut hand/trigger from plasma pistol
  3. Use a square file to make the two fit
  4. Glue the barrel-less flamer and trigger-less plasma pistol together
  5. Smooth out any cracks with Green-stuff


Other special weapons can also be combined with plasma pistols for a plasma gun. I’ve got grenade launches that are now plasma gunners for my Mordians and the old metal flamer Catachans can easily be turned into plasma in a similar fashion.












/Nicolai aka Atoom